自然科学版 英文版
自然科学版 英文版
自然科学版 英文版
自然科学版 英文版
英文版编委
自然科学版 英文版
英文版首届青年编委

您目前所在的位置:首页 - 期刊简介 - 详细页面

中南大学学报(自然科学版)

Journal of Central South University

第47卷    第4期    总第260期    2016年4月

[PDF全文下载]    [Flash在线阅读]

    

文章编号:1672-7207(2016)04-1219-08
劲性支撑穹顶结构的施工方法与试验研究
薛素铎1,高占远1, 2,张超1,王琼3

(1.北京工业大学 工程抗震与结构诊治北京市重点实验室,北京,100124;
2.清华大学 土木工程系,北京,100084;
3. 河北农业大学 理工学院,河北 保定,071071
)

摘 要: 基于劲性支撑穹顶结构具有杆件定位容易、自身质量小及结构效率高等特点,提出中心场地拼装逐步张拉提升的施工方法和地面拼装高空提升1次张拉成形的施工方法。将这2种施工方法对比分析,确定采用中心场地拼装逐步张拉提升的施工方法,采用FEDR算法进行施工成形分析。设计1个直径为6 m的劲性支撑穹顶结构模型,采用中心场地拼装逐步张拉提升的施工方法对试验模型进行施工,将试验结果与理论分析结果进行对比分析。分析试验过程中容易出现的关键问题并给出解决方案。研究研究表明:设计的试验模型是可行的;采用中心场地拼装逐步张拉提升的施工方法施工时,各步的内力和位移试验值与理论值基本吻合。

 

关键词: 劲性支撑穹顶结构;中心场地拼装逐步张拉提升施工方法;模型试验;FEDR算法

Research on construction method and model test of rigid bracing dome
XUE Suduo1, GAO Zhanyuan1, 2, ZHANG Chao1, WANG Qiong3

1. Beijing Key Laboratory of Earthquake Engineering and Structural Retrofit,
Beijing University of Technology, Beijing 100124, China;
2. Department of Civil Engineering, Tsinghua University, Beijing 100084, China;
3. College of Technology, Agricultural University of Hebei, Baoding 071071, China

Abstract:According to the structure characteristics of rigid bracing dome, the node-by-node assembling and integral tension method, ground assembly and overhead tensile construction method were given, the two kinds of construction method were analyzed, and the construction method was determined. The construction forming of structure was analyzed by FEDR algorithm. Experimental model of rigid bracing dome was designed with a diameter of 6 m.Test model was constructed by the first construction method. The experimental results and theoretical analysis results were analyzed. The key problemes were analyzed during the test and the solutions were given. The results show that when the center site assembling gradually stretching lifting construction method is used in test, the experimental results and theoretical analysis results are basically accordant.

 

Key words: rigid bracing dome; the node-by-node assembling and integral tension method; model experiment; FEDR algorithm

中南大学学报(自然科学版)
  ISSN 1672-7207
CN 43-1426/N
ZDXZAC
中南大学学报(英文版)
  ISSN 2095-2899
CN 43-1516/TB
JCSTFT
版权所有:《中南大学学报(自然科学版、英文版)》编辑部
地 址:湖南省长沙市中南大学 邮编: 410083
电 话: 0731-88879765(中) 88836963(英) 传真: 0731-88877727
电子邮箱:zngdxb@csu.edu.cn 湘ICP备09001153号