自然科学版 英文版
自然科学版 英文版
自然科学版 英文版
自然科学版 英文版
英文版编委
自然科学版 英文版
英文版首届青年编委

您目前所在的位置:首页 - 期刊简介 - 详细页面

中南大学学报(自然科学版)

Journal of Central South University

第49卷    第7期    总第287期    2018年7月

[PDF全文下载]    [Flash在线阅读]

    

文章编号:1672-7207(2018)07-1626-08
模内混合注塑成型聚丙烯与预制件间界面黏结强度研究
卢一1,蒋炳炎1, 2,符亮2,吴旺青2

(1. 中南大学 新型特种纤维及其复合材料湖南省重点实验室,湖南 长沙,410083;
2. 中南大学 高性能复杂制造国家重点实验室,湖南 长沙,410083
)

摘 要: 通过Moldflow软件仿真和成型实验,研究模内混合成型中连续纤维热塑性复合材料(CFRT)热压成型预制件与注塑成型聚丙烯间界面黏结强度。仿真研究预制件温度、熔体温度及保压压力对黏结界面温度场及压力场的影响规律,分析模内混合注塑成型界面黏结过程,指出CFRT预制件表面快速加热对界面黏结影响的重要性。研究结果表明:当预制件没有加热时,界面黏结强度随着熔体温度和保压压力的增加而显著提高,预制件达到熔点温度后,由于界面温度显著升高且足以满足界面分子扩散运动的能量需求,故熔体温度和保压压力的进一步提升对于界面黏结强度影响不大。

 

关键词: 模内混合;界面黏结;CFRT;分子扩散

Interfacial bonding strength between polypropylene and perform on in-mold hybrid injection molding technology
LU Yi1, JIANG Bingyan1, 2, FU Liang2, WU Wangqing2

1. Hunan Key Laboratory of Advanced Fibers and Composites, Central South University, Changsha 410083, China;
2. State Key Laboratory of High-Performance Complex Manufacturing, Central South University,
Changsha 410083, China

Abstract:Based on the simulation of Moldflow software and experiment, the interfacial bonding strength between the preform of continuous fiber reinforced thermoplastic(CFRT) composites and the plastic injection molding of polypropylene(PP) was studied during in-mold hybrid molding. The effect of preformed temperature, melt temperature and holding pressure on the temperature field and pressure field of bonding interface was researched by simulation, the interfacial bonding process of in-mold hybrid injection molding was analyzed, and the importance of rapid heating of CFRT surface for interfacial bonding was pointed out. The results show that without heating perform, the interfacial bonding strength is improved greatly with the increase of melt temperature and pressure. Due to the energy needs, the diffusion motion of interface molecules is satisfied by the significant increase of interface temperature after perform reaches the melting point, and the further improvement of melt temperature and holding pressure have little effect on the interfacial bonding strength..

 

Key words: in-mold hybrid; interfacial bonding; CFRT; molecular diffusion

中南大学学报(自然科学版)
  ISSN 1672-7207
CN 43-1426/N
ZDXZAC
中南大学学报(英文版)
  ISSN 2095-2899
CN 43-1516/TB
JCSTFT
版权所有:《中南大学学报(自然科学版、英文版)》编辑部
地 址:湖南省长沙市中南大学 邮编: 410083
电 话: 0731-88879765(中) 88836963(英) 传真: 0731-88877727
电子邮箱:zngdxb@csu.edu.cn 湘ICP备09001153号