自然科学版 英文版
自然科学版 英文版
自然科学版 英文版
自然科学版 英文版
英文版编委
自然科学版 英文版
英文版首届青年编委

您目前所在的位置:首页 - 期刊简介 - 详细页面

中南大学学报(英文版)

Journal of Central South University

Vol. 26    No. 12    December 2019

[PDF Download]    [Flash Online]

    

Finite element simulation and microstructure of two-pass inner spinning process of curved-generatrix cone cylindrical parts with annealing/quenching
HAO Zeng-liang(郝增亮)1, YANG Zhe-yi(杨哲懿)1, WEI Wei(魏巍)3, LIU Lei(刘磊)3, LUO Jun-ting(骆俊廷)1, 2, LIU Jin-heng(刘金恒)1

1. Key Laboratory of Advanced Forging & Stamping Technology and Science of Ministry of Education,Yanshan University, Qinhuangdao 066004, China;
2. State Key Laboratory of Metastable Materials Science and Technology, Yanshan University,Qinhuangdao 066004, China;
3. Hebei Construction Material Vocational and Technical College, Qinhuangdao 066000, China

Abstract:A two-pass annealing/quenching internal spinning process with small-end rotations is proposed to form a curved generatrix conical thin-walled shell. That is, annealing at 360°C for 2 h followed by the 1st pass spinning, and finally quenching in ice water after holding for 1 h at 498 °C followed by the 2nd pass spinning. ABAQUS finite element software is used to simulate the internal spinning process of the products formed under different forming parameters. The distribution laws of spinning force, the stress and strain under different forming processes were compared and analyzed. The mechanical properties and microstructure of the products are subsequently analyzed. The results show that the strain and the residual stress in the skin area of the formed products under two-pass spinning process more uniform, and the hardness and the mechanical performance are improved. The microstructure of the products formed with the 0.15 mm thickness reduction at the 2nd pass is excellent. And the second phase grain size distributed uniformly in the range of 3–6 μm. Whereas, the second phase particles are broken seriously and the size distribution inhomogeneity is increased when the thickness reduction in the skin area is greater than 0.20 mm at the 2nd pass spinning process.

 

Key words: curved generatrix conical; internal spinning process; annealing/quenching; small-end rotations; finite element simulation

中南大学学报(自然科学版)
  ISSN 1672-7207
CN 43-1426/N
ZDXZAC
中南大学学报(英文版)
  ISSN 2095-2899
CN 43-1516/TB
JCSTFT
版权所有:《中南大学学报(自然科学版、英文版)》编辑部
地 址:湖南省长沙市中南大学 邮编: 410083
电 话: 0731-88879765(中) 88836963(英) 传真: 0731-88877727
电子邮箱:zngdxb@csu.edu.cn 湘ICP备09001153号